Regular Flanges
Slip-On Flange
- Simple Structure: Simple design with low manufacturing cost
- Easy Installation: Easy installation by inserting pipe and welding
- Cost-effective: Relatively low cost with high cost-performance ratio
- Good Sealing: Reliable sealing through welding connection
- Wide Application Range: Suitable for multiple low-pressure conditions
- Easy Processing: Simple structure for easy mechanical processing
Slip-On Flange is a commonly used pipe connection flange with a simple structure, relatively simple design, and no complex structure, making it easy to manufacture and install. The flange is connected by inserting the pipe into the flange bore and then welding on both sides of the flange plate. Slip-on flanges feature low cost, easy installation, and good sealing performance, and are widely used in low-pressure pipeline systems in fields such as water supply and drainage engineering, petrochemical, and HVAC.
Technical Standards
| Item | Technical Standard |
|---|---|
| Material | Carbon Steel, Stainless Steel, Alloy Steel |
| Standard | ASME B16.5, ASME B16.47, EN 1092-1, GB/T 9113 |
| Pressure Rating | PN2.5 to PN100, Class150 to Class300 |
| Size Range | 3/8" to 80" (DN10 to DN2000) |
| Temperature Range | -29℃ to +425℃ |
| Face Type | Flat Face (FF), Raised Face (RF) |
| Welding Type | Slip-On Welding |
| Manufacturing Process | Forging, Machining |
Basic Models
| Model | Type | Features |
|---|---|---|
| SO-10 | PN10 Slip-On Flange | Low pressure application, cost-effective |
| SO-16 | PN16 Slip-On Flange | Low-medium pressure application, stable performance |
| SO-25 | PN25 Slip-On Flange | Medium pressure application, moderate strength |
| SO-40 | PN40 Slip-On Flange | Medium-high pressure application, safe and reliable |
Main Components Material Table
| No. | Part Name | Material |
|---|---|---|
| 1 | Flange Body | A105, A350 LF2, F304, F316 |
| 2 | Sealing Face | Same as flange body |
| 3 | Weld Bevel | Matched to pipe material |
| 4 | Surface Treatment | Anti-rust paint, galvanized or passivated |
| 5 | Bolt Holes | Machined as part of flange body |
No drawing available.
